Newson Gale

Call us now on (+1) 732 961 7610

Linked In Twitter You Tube 

Home > Our Products > Cen - Stat

Cen-Stat X45 and X90

ATEX, FM approved grounding clamps, cables and reels

The Cen-Stat X45 and X90 are general purpose static grounding clamps, ATEX and FM certified for guidelines of safe use within hazardous areas.

Cen-Stat X45 and x90 grounding clamps are made from corrosion resistant stainless steel (304) and contain two hard wearing tungsten carbide tips that bite through rust, paint and product deposits. It is designed specially for use on large containers, drums and IBCs.

    

Grounding Clamps

 Grounding Clamps
Tungsten carbide tips

  

ATEX and FM approved static grounding clamps.

Electrical continuity from tips to cable connection of less than 1 ohm.

Vibration resistant contact with positive spring action.

Corrosion resistant stainless steel construction. 

5 good reasons to specify ATEX & FM approved grounding clamps

    1.   Grounding Clamps Pressure Testing
          Ensures the grounding clamp is capable of establishing and maintaining low resistance electrical contact with equipment (FM approvals).

    2.   Electrical Continuity Testing
          Ensuring the continuity from the tip throughout the grounding clamp is less than 1 ohm (FM approvals).

    3.   High Frequency Vibration Testing
          Ensures the grounding clamp is capable of maintaining positive contact when attached to vibrating equipment (FM approvals).

    4.   Mechanical Pull Testing
          Ensures the grounding clamp cannot be pulled off the equipment without an intentional application of force (FM approvals).

    5.   Sources of mechanical sparking
          Ensures no mechanical sparking sources are present in the grouding clamp (ATEX certification).
 

! Remember !

Drums and containers can have typical coating thicknesses of 675 micro-metres. The flat surfaces of basic welding clamps and battery clips are not designed to penetrate such coatings. Product deposits on drums and containers have thicknesses of up to several millimetres. It is of critical importance to specify grounding clamps that can make regular and positive electrical contact with the conductive parts of the container. This will ensure that every time a process capable of generating static charges is carried out the risk of an incendive static spark discharge is reduced to an acceptable level.
 
Ordering Code

VESX45/1U03

VESX45/R20


VESX90/1U05


VESX90/R30		 Product Description for our range of Grounding Clamps

X45 Stainless Steel Medium Duty Grounding Clamp & 3m (10ft) Hytrel Coated Retractable Spiral Cable

6m (20ft) Self Retracting Reel & X45 Stainless Steel Medium Duty Grounding Clamp

X90 Stainless Steel Heavy Duty Grounding Clamp & 5m (15ft) Hytrel Coated Retractable Spiral Cable

9m (30ft) Self Retracting Reel & X90 Stainless Steel Heavy Duty Grounding Clamp

Quick Enquiry


















How to control static in hazardous areas
grounding and bonding
FREE 32 page booklet
Get yours NOW!





Change Image